Rowenta IC7100 User Manual download pdf (Page 8)

Recommendations:

• Before you begin using the iron, or if you have not used any steam for a few minutes, press the

steam control button several times in a row, holding the iron away from your clothes.

This will enable any cold water to be removed from the steam-circuit.

•

Iron temperature control setting:

- Start with any fabrics to be ironed at a low temperature (•), and finish with those which need

higher temperatures (• • • or Max).

- Mixed-fibre fabrics: Set the ironing temperature to the setting for the most delicate fabric.

- Woollen garments : Press the iron’s steam control button intermittently to produce short

bursts of steam, without placing the iron on the garment itself.

•

Steam output control dial setting:

- Thick fabrics: Increase the steam output setting.

- Low temperature ironing: Set the steam output control dial to the low position.

•

Dry ironing:

Do not press the steam control button under the iron handle.

• If you are using starch, it should be sprayed onto the reverse side of the fabric to be ironed.

•

Ironing board cover:

We recommend ironing the ironing board cover with a very hot iron before you use it for the

first time. For perfect results every time, only replace with a Rowenta ironing board cover

available from our authorised service dealers.

7 • VERTICAL STEAM IRONING

1. Set the iron temperature control and the steam output control dial (located

on the control panel) to the maximum position.

2. Hang the garment on a coat hanger and hold the fabric slightly taut with

one hand.

As steam is very hot, never attempt to remove creases from a garment

while it is being worn - always hang garments on a coat hanger.

3. Holding the iron in a vertical, tilted position, press in one second bursts on

the steam control button (located beneath the iron handle) while moving

the iron from top to bottom (14).

Recommendations: With fabrics other than linen or cotton, hold the iron a few centimetres

away from the garment, to avoid burning the fabric.

(14)

8 • HUMID STEAM FUNCTION

Press the humid steam button (15) two or three times to obtain a steam

boost as required:

- When ironing thick fabrics,

- In order to eliminate unwanted creases,

- For powerful vertical crease removal.

Important: Use the humid steam function very carefully because of the exceptional power

of the steam that may cause burns.

(15)

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments

Rowenta IC7100 User Manual Page 8

Comments to this Manuals

Related products and manuals for Irons Rowenta IC7100