Rowenta ESPREMIO ES6400 User Manual download pdf (Page 13)

17

ENG

• For good frothy milk, use circular movements

and move from top to bottom (fig. 15). The

pump operates intermittently, this is normal.

• In order to obtain good frothy milk, the milk

should be very fresh and very cold. We

recommend using pasteurised or UHT milk,

and not using untreated milk.

• During operation, it is normal for the

temperature light of the ON/OFF button to

light up and then extinguish.

• When the liquid is hot and/or frothy, switch

off the appliance (selector d1 in the position

"0").

• When the selector d1 is in the position "0", the

appliance cools down automatically. During

the cooling down phase, the LED of the

ON/OFF button flashes, and hot water runs

into the drip tray. When the optimal

temperature for preparing an espresso is

reached, the LED remains lit.

8. MAINTENANCE AND CLEA-

NING

The accessories and removable parts of the

appliance are not dishwasher proof.

A. The appliance

• Unplug the machine each time before

cleaning and leave the appliance to cool

down.

• Clean the outside of the appliance from time

to time with a damp sponge. Wash the tank,

the drip tray and its grill regularly and dry

them.

• Rinse the inside of the tank regularly.

• When a fine white film obscures the tank,

carry out a descaling operation.

(see paragraph 9. DESCALING).

• Do not use alcohol or solvent based cleaning

products.

• Once the appliance has been unplugged,

clean the hot water grill and the seal

regularly, using a damp sponge

(fig. 16).

B. The filter holder

The appliance that you have purchased is

equipped with a removable ejecting filter holder,

which allows you to maintain it in perfect

working order. We recommend that you clean it

each time after use.

These removal/fitting operations must be carried

out when the machine has cooled down.

1. Removal of the filter holder:

• Remove the filter holder from your machine.

• Dispose of the used coffee or pod by pressing

the ejection button

(fig. 11).

• Rinse in clear water.

• Hold the bottom of the filter holder between

your thumb and index finger.

• Exert pressure on it with the thumb and index

finger at the same time, then pull it downwards

(fig. 17).

2. Cleaning and rinsing the filter holder:

The filter holder may then be cleaned using a

household detergent and a scouring pad, but

must be rinsed afterwards in clear water. For

best results, you may actuate the ejection button

several times while rinsing.

We recommend shaking your filter holder

vigorously in order to evacuate all water.

3. Fitting the filter holder:

First inset the bottom of the filter holder into the

slot provided for this purpose, then push it in

until you hear a "click" which ensures that it is

locked into place

(fig. 18).

C. The drip tray

As soon as the level gauge appears, the drip tray

must be emptied after first removing the grill

(fig. 19 and 20).

The presence of water is normal and is not the

sign of a leak. If required, clean the drip tray and

its grill with water and a little non aggressive

detergent. Rinse and dry.

IMPORTANT!

Once the steam has been stopped, clean

the steam nozzle immediately and tho-

roughly using a damp sponge (to avoid

residues from sticking) and let a little more

steam run through into free air to rinse the

inside of the nozzle.

WARNING!

The steam nozzle is still hot!

Be careful not to burn yourself.

7271 - ROWENTA 6400 - EE:0827963 15/01/08 9:04 Page 17 (Noir/Black film)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 95 96

Comments to this Manuals

No comments